Hendricks Manufacturing

CNC Machining Center for Nested Based Manufacturing

Hendrick introduces the 20ZXGN-ATCT6-NBM CNC Machining Center featuring a rotary automatic tool changer mounted on the front of a 12 HP high frequency router spindle for rapid tool change on the fly, drill block with independent drill actuation by program and high speed accurate machining capabilities. 

A heavy structure design and improved CNC control software yields feed rates up to 2500 inches per minute and positioning accuracy of +/- 0.002 inches with repetitive accuracy of +/- 0.0008 inches.  The moving gantry design utilizes AC servo drives, THK linear ways and ball screws on all axes for smooth and accurate movement. 

Other features include PC controller with built in CAD/CAM software, vacuum table machined for zoning and pod fixturing, as well as air blast tool cooling.  The machine is available in many different table sizes. 

CNC Machining Center for Nested Based Manufacturing Details

Hendrick Pro-V Vertical Beam Saw

Hendrick offers a line of heavy duty, fully automatic vertical beam saws that features precision accuracy needed to stack cut and cross-cut small all sized parts while requiring minimal floor space.  The Hendrick Pro-V Beam Saw has a full length pneumatic hold-down bar to provide confirmed placement of material while cutting, a heavy-duty frame to maintain squareness, and a solid surface material support area.  Featuring ±.005” straight line accuracy, an operator solely needs to place the material against the stop, press the button to activate the hold-down bar and then press the start button to rip or cross-cut anything ranging from less than ½” squares up to 10’ sheets.

The compact design of the saw allows for minimal use of floor space and offers single blade scoring and three cutting modes: normal, reciprocating and scoring.  Driven by a 9HP motor, the adjustable saw blade travels on precision machined ways and the 2HP variable speed automatic saw carriage traverse motor by AC inverter is standard with speeds up to 75 fpm. 

Pro-V Vertical Beam Saw Details

SRP Enhanced Industrial Class Panel Saw

 Hendrick offers the SRP Enhanced Industrial Class Series high-speed computerized panel saw. The machine is equipped with a variable speed 24 HP main blade motor and 3 HP scoring motor.  Standard with the SRP is a solid pusher with material grippers, material indexing speeds up to 3000 inches per minute, with a Windows XP Professional PC Controller, LAN interface, onboard optimization software, and more. Optional features include solid or roller wheel back tables, a rear lift table, spray mist coolant on main blade, automatic blade height adjustment and full angular plant configurations.

SRP Enhanced Industrial Class Panel Saw Details

Hendrick HP-3 Computerized Vertical Beam Saw

Hendrick offers a complete line of fully automated computerized vertical beam saws.  The machine controller has large program storage capacity and can receive off line cut optimization patterns.  Cut lengths range from 4' through 10' models.  Solid phenolic table surfaces and a full length pneumatic pressure beam with up to 12HP blade motor.  Precision material indexing is by THK ball screw and linear ways.  Reciprocating and scoring cut modes come standard. 

HP-3 Computerized Vertical Beam Saw Details

NRP Enhanced Industrial Class Panel Saw

Hendrick introduces the new NRP Enhanced Industrial Class Series high-speed computerized panel saw. The machine is equipped with a variable speed 24 or 36 HP main blade motor and 3 HP scoring motor, spray mist coolant on main blade with pneumatic quick change blade collar, and automatic blade height adjustment according to thickness of material being cut.  Full length pneumatic hold-down with front mounted auxiliary hold-down that secures the material while the pusher retracts for last cut.  The NRP has material grippers with 5” opening for pulling sheet stacks onto back table and holding material for accurate cutting. The solid aluminum plate in cross-cutting area allows for cross-cutting of narrow strips. The machine offers impressive saw carriage speeds of up to 6000 inches per minute and material indexing speeds of up to 4000 inches per minute.  Standard with the NRP is a Windows XP Professional PC Controller, LAN and USB 2.0 interface, onboard optimization software, and more. Optional features include a rear lift table and full angular plant configurations.

NRP Enhanced Industrial Class Panel Saw

HPS Panel Saw

Hendrick continues to offer the original panel saw, the Hendrick HPS Series Panel Saw, commonly referred to as a Rail Saw. The HPS, manufactured at Hendrick in Salem, MA, USA, comes in a wide range of manual and automatic over table models.  The machine is an ideal production solution for cutting a wide variety of materials in virtually any fabrication environment.  Typical cutting applications include: wood, non-ferrous metals, plastics, countertops, rubber, stone, fiberglass, glass, laminates, paper and many more.  The saw features 5HP or 7.5HP blade motors on precision polished steel rails.  The Hendrick HPS is available in cut lengths of 4, 6, 8, 10 and 12 feet at up to 1,000 inches per minute. Hendrick offers many options such as variable speed automatic saw travel, pneumatic pressure beam and dust/chip evacuation.  New features include an optional PLC based control system with or without HMI touch screen offering onboard diagnostics, custom machine colors, as well as custom machine configurations.

HPS Panel Saw Details

CTCS Counter Top Saw

Hendrick offers the Counter Top Saw that was specifically designed for cutting counter top materials.  The saw features a 5HP 3 phase or 3HP/ 1 phase main blade motor, precision polished steel rails, manual or automatic variable speed saw traverse, 16” x 1” bore blade diameter, 6 3/16” depth of cut, with a 78” at 1” cut depth and 64” at full cut depth length of cut.  The Hendrick Counter Top Saw table dimensions are 96”L x 64”W.

CTCS Counter Top Saw Details

New Hendrick Mini Chip Grinder

Hendrick announces the introduction of a new 10HP Mini Chip Grinder for processing offal from woodworking machinery such as panel saws and cross cut saws.  Designed to be placed at the source of the offal the Mini Chip Grinder eliminates the costly handling of waste material.  A 10’ long by 6” wide material in-feed conveyor is included.  Material up to 1” thick can be processed through the cutter head, which has disposable insert tooling.  The unit connects directly to dust collection systems to dispose of the ground waste. 

Hendrick US-X 50 CROSS-CUT Saw
THE “LEAN” SOLUTION

Hendrick US-X Series Cross-Cut Saws allows manufacturers to dedicate their existing horizontal panel saw to rip cutting and send linear strips to the cross-cut saw, increasing production while minimizing the use of floor space. 

Hendrick cross-cut saws feature totally concealed blades, scoring and full length pneumatic hold-down.  Tolerances to +/-0.005” and adjustable cut lengths up to 60” are offered with manual or computerized controllers, automatic pusher indexing systems, material grippers, front and back feed tables, variable speed saw carriage traverse, adjustable length of cut, automatic saw carriage return, safety beams, cover interlocks and emergency stop switches; providing up to a 3” depth of cut. 

The Hendrick US-X Cross-Cut Series is a key element in implementing “Lean Manufacturing” into your production environment.

US-X Cross-Cut Details